Suitable For Heavy Diesel Vehicles
With the ScanGaugeD, you can monitor the most vital systems of your large diesel powered vehicle and provide the kind of real time information you’ve been missing. Features include more than 15 built-in digital gauges, 5 Trip Computers and an easy-to-use ScanTool that shows trouble codes — all in a compact design that installs in minutes.
- Compatible with the both J1939 & J1708 protocols
- More than 15 Built-in Digital Gauges
- Check & Clear Trouble Codes
- Multiple Trip Computers
- X-Gauge programmable gauge system
- Performance Monitor
The ScanGaugeD works with most 1987 and newer large diesel over-the-road vehicles. The ScanGauge is equipped with a unique dual connector cable designed to accommodate both the J1939 protocol with a 9-pin diagnostic port as well as the J1708 protocol with 6-pin diagnostic port.
ScanGauge-D provides real-time gauges to show you what is going on “under the hood” with more than 15 built-in digital gauges. The gauge screen allows you to select and display 4 gauges at a time, so you can monitor the current operating conditions of your vehicle in real-time.
Exclusive Programmable Gauge System
In addition to the standard set of gauges, the ScanGauge-D features the exclusive X-GAUGE™ programmable gauge system; you can monitor parameters such as transmission temperature, trip data and fuel economy information. X-Gauge™ gives you the ability to customise your ScanGauge-D by adding additional vehicle specific digital gauges.
|AVG||Average Fuel Economy|
|CLSD LP |
|Fuel System Loop Status|
|CPM||Cost Per Mile|
|Intake Air Temperature|
|Gallons Per Hour
Litres Per Hour
|Manifold Absolute Pressure
|Miles Per Gallon
Kilometers Per Gallon
Miles Per Litres
Liters Per 100Km
Kilometeres Per Liter
|Miles Per Hour
Kilometers Per Hour
|RPM||Revolutions Per Minute|
|TFC||Trip Fuel Cost|
|TPS||Throttle Position Sensor|
Automatic Trip Computers
With five built-in trip computers, the ScanGauge can keep track of everything from fuel cost to distance traveled and everything in between. Data is stored on the ScanGauge and is retained even when the power is disconnected. Each trip computer starts automatically and information is available anytime during the trip.
|Time & Distance Trip Computers||Fuel & Tank Trip Computers|
|ScanGauge includes three trip computers based on time and distance. They include the Current Trip, Today Trip and Previous Day Trip. Each trip computer starts automatically and tracks the following parameters:||The ScanGauge includes two trip computers based on the current tank of fuel. They include the Current Tank and Tank to Empty. Each trip computer starts automatically when you tell ScanGauge you have filled your tank.|
|KM/L MPG||MPG / KML for current tank|
|Fuel Used||Fuel Used on current tank|
|Max Coolant Temperature||Tank to Empty|
|KMs Driven||Distance Driven|
|Max RPM||Distance Until Empty|
|Hours Driven||Hours driven on current tank|
|Max KPH||Hours to Empty|
|Average KPH||Average Speed|
|Fuel Cost||Fuel Used Cost|
The ScanGaugeII features the all-new Performance Monitor™ for real-time performance measurements. The Performance Monitor gives you the ability to track your vehicle’s performance over short periods of time, distance and acceleration.
Monitor various aspects of your vehicle’s performance such as:
- Track your quarter-mile times and speeds at the track.
- Determine your vehicle’s 0-60 time.
- Measure your vehicle’s braking performance.
- Save and Recall performance runs.
- Monitor specific Digital Gauges.
- and much more…
|Available Performance Data Parameters|
|Time||The amount of elapsed time at each data point from the beginning of the Performance Run to the end of the run|
|Speed||The speed of the vehicle at each data point|
|Distance||The total distance traveled at data point|
|Monitored Gauge||Use the Monitor Function to select a built-in digital gauge to monitor. Data will be recorded for the selected gauge.|
Performance Monitor Home
Provides access to all the Performance Monitor Features.
Arming the Performance Monitor
Arm the ScanGaugeII Performance Monitor just before you’re ready to record your run. The ScanGaugeII will automatically start recording when it detects change in speed.
Performance Recording Screen
Once the ScanGauge begins recording, it will display your time and speed in real-time. You can stop the recording at any time by pressing the STOP button.
Performance Data Screen
You can step through the recorded data. ScanGaugeII can store up to 10 individual runs.
Take More Control Of Your Vehicle
Engine Scan Tool
The ScanGauge-D can check for Diagnostic Trouble Codes (DTCs) and if found, can display how many there are and the Trouble Codes themselves. Using the internet or repair manuals, these can be translated to the failed component and repairs can be made.
- Reads Trouble Codes
- Clears Trouble Codes
- Shows Conditions When Trouble Was Detected (RPM, COOLANT, TEMP etc)
- Turns Off “CHECK ENGINE” Lamp
- Shows When Onboard Tests Have Been Completed And Vehicle Is Ready To Pass OBDII emissions Testing
Easy To Use & Install
Easy to Install No Tools Required
Installs in just minutes without tools. Simply plug the ScanGauge into the diagnostic connection under the dash.
No Batteries Required
The single connection to the diagnostic connector under the dashboard is all that is needed.
Automatic Protocol Determination
ScanGauge automatically determines the protocol your vehicle uses and connects.
6-Foot Cord and Velcro® Attachment
The ScanGauge can be mounted up to 6 feet from the under-dash diagnostic connector. The included Velcro® attachment system allows the ScanGauge to be quickly detached and then used to troubleshoot other vehicles.
User-Friendly Menu-Driven Operation
Simple 5-button operation allows you to quickly and easily access the powerful features of the ScanGauge.
Colour Backlight Display
Match your instrument panel for an integrated look.
English & Metric Units
The Digital Gauges and Trip Computer information can be shown in either English or Metric units of measure, including KM’s, Litres, Celsius, and kPA.
Automatic Power Control
- Automatic delayed power-down after engine shutoff
- Automatic power-up when engine is started
- Manual power-up with delayed power-down via HOME key
User Settable Backlight
- Display Colour, 7 Standard screen colours and a custom setting with 63 possible colours.
- Backlight for night use
- User settable Off, Low and High
Easy To Operate
- Simple on-screen operation
- 4 menu driven soft keys
- User settable update rate (Slow, Normal and Fast)
- A HOME key to quickly return to the start screen
(stored information is not lost when disconnected)
- User settings automatically saved
- Up to 10 user commands can be stored and recalled
- Today, Yesterday and Tank Trip data automatically saved
- Vehicle settings automatically saved