Scangauge E

 

The ScanGauge-E works with most OBDII compatible cars & light trucks.  It provides you with real-time information about your vehicle’s fuel economy through an intuitive graphic display. Use the instant feedback provided by ScanGaugeE™ to adjust your driving style and improve your fuel economy.

  • Compatible with all OBDII protocols
  • More than 15 Built-in Digital Gauges
  • Check & Clear Trouble Codes
  • Multiple Trip Computers
  • Monitor your carbon footprint

Digital Gauges

ScanGaugeE provides real-time gauges to show you what is going on “under the hood” with more than 15 built-in digital gauges. The gauge screen allows you to select and display 2 gauges at a time, so you can monitor the current operating conditions of your vehicle in real-time.

Learn To Improve Your Fuel Economy With Scangauge-E

ScanGauge provides real-time data about your vehicle’s instant and average fuel economy, fuel used, cost of fuel used for each trip, cost per mile, gallons per hour and more!

There are many ways to reduce your fuel usage and increase fuel economy. Real time feedback like what the ScanGauge provides is one of the most effective.

Driving More Efficiently With ScanGauge Can Save Up to:

33% Saving

Removing Excess Weight and Drag can save up to:

17% Saving

Simply Observing the Speed Limit can save up to:

14% Saving

Avoiding Excessive Idling can save up to:

2% Saving

Digital GaugeName
AVGAverage Fuel Economy
CLSD LP
OPEN LP
Fuel System Loop Status
CPMCost Per Mile
FIA
CIA
Intake Air Temperature
FPRFuel Pressure
FWT
CWT
Water Temperature
GPH
LPH
Gallons Per Hour
Litres Per Hour
MAP
BST
Manifold Absolute Pressure
Boost
MPG
KPG
MPL
LHK
KPL
Miles Per Gallon
Kilometers Per Gallon
Miles Per Litres
Liters Per 100Km
Kilometeres Per Liter
MPH
KPH
Miles Per Hour
Kilometers Per Hour
RPMRevolutions Per Minute
TFCTrip Fuel Cost
TPSThrottle Position Sensor
VLTBattery Voltage
IGNIgnition Timing
LODEngine Loading
HPRHorsepower

Automatic Trip Computers

With five built-in trip computers, the ScanGauge can keep track of everything from fuel cost to distance traveled and everything in between. Data is stored on the ScanGauge and is retained even when the power is disconnected. Each trip computer starts automatically and information is available anytime during the trip.

Time & Distance Trip ComputersFuel & Tank Trip Computers
ScanGauge includes three trip computers based on time and distance. They include the Current Trip, Today Trip and Previous Day Trip. Each trip computer starts automatically and tracks the following parameters:The ScanGauge includes two trip computers based on the current tank of fuel. They include the Current Tank and Tank to Empty. Each trip computer starts automatically when you tell ScanGauge you have filled your tank.
KM/L MPGMPG / KML for current tank
Fuel UsedFuel Used on current tank
Max Coolant TemperatureTank to Empty
KMs DrivenDistance Driven
Max RPMDistance Until Empty
Hours DrivenHours driven on current tank
Max KPHHours to Empty
Average KPHAverage Speed
Fuel CostFuel Used Cost

Real-Time CO2 Monitoring

ScanGaugeE can monitor a number of parameters related to your CO2 output and fuel usage. The screen above is showing current CO2 (CO2), the Trip CO2 (TCO) and the Real-time Fuel Economy Graphic Feedback.

You can also track the days Total CO2 and Total CO2 for the tank within the built-in Trip Computers.

Turn off That Check Engine Light!

The ScanGauge E can check for Engine Diagnostic Trouble Codes (DTCs) and if found, can display how many there are and the Trouble Codes themselves. Using the internet or repair manuals, these can be translated to the failed component and repairs can be made.

  • Reads Trouble Codes
  • Clears Trouble Codes
  • Shows Conditions When Trouble Was Detected (RPM, COOLANT, TEMP etc)
  • Turns Off “CHECK ENGINE” Light
  • Shows When Onboard Tests Have Been Completed And Vehicle Is Ready To Pass OBDII emissions Testing

Easy To Use & Install

Easy to Install No Tools Required

Installs in just minutes without tools. Simply plug the ScanGauge into the diagnostic connection under the dash.

No Batteries Required

The single connection to the diagnostic connector under the dashboard is all that is needed.

Automatic Protocol Determination

ScanGauge automatically determines the protocol your vehicle uses and connects.

6-Foot Cord and Velcro® Attachment

The ScanGauge can be mounted up to 6 feet from the under-dash diagnostic connector. The included Velcro® attachment system allows the ScanGauge to be quickly detached and then used to troubleshoot other vehicles.

User-Friendly Menu-Driven Operation

Simple 5-button operation allows you to quickly and easily access the powerful features of the ScanGauge.

Colour Backlight Display

Match your instrument panel for an integrated look.

English & Metric Units

The Digital Gauges and Trip Computer information can be shown in either English or Metric units of measure, including KM’s, Litres, Celsius, and kPA.

Great Features

Automatic Power Control

  • Automatic delayed power-down after engine shutoff
  • Automatic power-up when engine is started
  • Manual power-up with delayed power-down via HOME key

User Settable Backlight

  • Display Colour, 7 Standard screen colours and a custom setting with 63 possible colours.
  • Backlight for night use
  • User settable Off, Low and High

 

Easy To Operate

  • Simple on-screen operation
  • 4 menu driven soft keys
  • User settable update rate (Slow, Normal and Fast)
  • A HOME key to quickly return to the start screen

Non-Volatile Memory

(stored information is not lost when disconnected)

  • User settings automatically saved
  • Up to 10 user commands can be stored and recalled
  • Today, Yesterday and Tank Trip data automatically saved
  • Vehicle settings automatically saved
Download ScangaugeE User Manual
Download