Australian Version

ScanGaugeII can help you monitor your vehicle’s most vital systems and provide the kind of real-time information you’ve been missing. Features include more than 15 built-in digital gauges, 5 sets of trip data and an easy-to-use Scan Tool that shows both set and pending trouble codes — all in an ultra compact design that installs in minutes.

  • Compatible with all OBDII protocols
  • More than 15 Built-in Digital Gauges
  • Check & Clear Trouble Codes
  • Multiple Trip Computers
  • X-Gauge programmable gauge system
  • Performance Monitor

Digital Gauges

ScanGaugeII provides real-time gauges to show you what is going on “under the hood” with more than 15 built-in digital gauges. The gauge screen allows you to select and display 4 gauges at a time, so you can monitor the current operating conditions of your vehicle in real-time.

Exclusive Programmable Gauge System

In addition to the standard set of gauges, the ScanGaugeII features the exclusive X-GAUGE™ programmable gauge system; you can monitor parameters such as transmission temperature, trip data and fuel economy information. X-Gauge™ gives you the ability to customise your ScanGaugeII by adding additional vehicle specific digital gauges.

                                                                            Find X-Gauges For Your Vehicle

Digital GaugeName
AVGAverage Fuel Economy
CLSD LP
OPEN LP
Fuel System Loop Status
CPMCost Per Mile
FIA
CIA
Intake Air Temperature
FPRFuel Pressure
FWT
CWT
Water Temperature
GPH
LPH
Gallons Per Hour
Litres Per Hour
MAP
BST
Manifold Absolute Pressure
Boost
MPG
KPG
MPL
LHK
KPL
Miles Per Gallon
Kilometers Per Gallon
Miles Per Litres
Liters Per 100Km
Kilometeres Per Liter
MPH
KPH
Miles Per Hour
Kilometers Per Hour
RPMRevolutions Per Minute
TFCTrip Fuel Cost
TPSThrottle Position Sensor
VLTBattery Voltage
IGNIgnition Timing
LODEngine Loading
HPRHorsepower

Automatic Trip Computers

With five built-in trip computers, the ScanGauge can keep track of everything from fuel cost to distance traveled and everything in between. Data is stored on the ScanGauge and is retained even when the power is disconnected. Each trip computer starts automatically and information is available anytime during the trip.

 

Time & Distance Trip ComputersFuel & Tank Trip Computers
ScanGauge includes three trip computers based on time and distance. They include the Current Trip, Today Trip and Previous Day Trip. Each trip computer starts automatically and tracks the following parameters:The ScanGauge includes two trip computers based on the current tank of fuel. They include the Current Tank and Tank to Empty. Each trip computer starts automatically when you tell ScanGauge you have filled your tank.
KM/L MPGMPG / KML for current tank
Fuel UsedFuel Used on current tank
Max Coolant TemperatureTank to Empty
KMs DrivenDistance Driven
Max RPMDistance Until Empty
Hours DrivenHours driven on current tank
Max KPHHours to Empty
Average KPHAverage Speed
Fuel CostFuel Used Cost

Performance Monitor


The ScanGaugeII features the all-new Performance Monitor™ for real-time performance measurements. The Performance Monitor gives you the ability to track your vehicle’s performance over short periods of time, distance and acceleration.

Monitor various aspects of your vehicle’s performance such as:

  • Track your quarter-mile times and speeds at the track.
  • Determine your vehicle’s 0-60 time.
  • Measure your vehicle’s braking performance.
  • Save and Recall performance runs.
  • Monitor specific Digital Gauges.
  • and much more…
Available Performance Data Parameters
ParametersDescription
TimeThe amount of elapsed time at each data point from the beginning of the Performance Run to the end of the run
SpeedThe speed of the vehicle at each data point
DistanceThe total distance traveled at data point
Monitored GaugeUse the Monitor Function to select a built-in digital gauge to monitor. Data will be recorded for the selected gauge.

Performance Monitor Home

Provides access to all the Performance Monitor Features.

Arming the Performance Monitor

Arm the ScanGaugeII Performance Monitor just before you’re ready to record your run. The ScanGaugeII will automatically start recording when it detects change in speed.

Performance Recording Screen

Once the ScanGauge begins recording, it will display your time and speed in real-time. You can stop the recording at any time by pressing the STOP button.

Performance Data Screen

You can step through the recorded data.  ScanGaugeII can store up to 10 individual runs.

Take More Control Of Your Vehicle

Turn off That Check Engine Light!

The ScanGaugeII can check for Diagnostic Trouble Codes (DTCs) and if found, can display how many there are and the Trouble Codes themselves. Using the internet or repair manuals, these can be translated to the failed component and repairs can be made.

  • Reads Trouble Codes
  • Clears Trouble Codes
  • Shows Conditions When Trouble Was Detected (RPM, COOLANT, TEMP etc)
  • Turns Off “CHECK ENGINE” Lamp
  • Shows When Onboard Tests Have Been Completed And Vehicle Is Ready To Pass OBDII emissions Testing

Easy To Use & Install

Easy to Install No Tools Required

Installs in just minutes without tools. Simply plug the ScanGauge into the diagnostic connection under the dash.

No Batteries Required

The single connection to the diagnostic connector under the dashboard is all that is needed.

Automatic Protocol Determination

ScanGauge automatically determines the protocol your vehicle uses and connects.

6-Foot Cord and Velcro® Attachment

The ScanGauge can be mounted up to 6 feet from the under-dash diagnostic connector. The included Velcro® attachment system allows the ScanGauge to be quickly detached and then used to troubleshoot other vehicles.

User-Friendly Menu-Driven Operation

Simple 5-button operation allows you to quickly and easily access the powerful features of the ScanGauge.

Colour Backlight Display

Match your instrument panel for an integrated look.

English & Metric Units

The Digital Gauges and Trip Computer information can be shown in either English or Metric units of measure, including KM’s, Litres, Celsius, and kPA.

Great Features

Automatic Power Control

  • Automatic delayed power-down after engine shutoff
  • Automatic power-up when engine is started
  • Manual power-up with delayed power-down via HOME key

User Settable Backlight

  • Display Colour, 7 Standard screen colours and a custom setting with 63 possible colours.
  • Backlight for night use
  • User settable Off, Low and High

 

Easy To Operate

  • Simple on-screen operation
  • 4 menu driven soft keys
  • User settable update rate (Slow, Normal and Fast)
  • A HOME key to quickly return to the start screen

Non-Volatile Memory

(stored information is not lost when disconnected)

  • User settings automatically saved
  • Up to 10 user commands can be stored and recalled
  • Today, Yesterday and Tank Trip data automatically saved
  • Vehicle settings automatically saved
Download ScangaugeII User Manual
Download