X-Gauges to suit Australian Vehicles – Updated 18/10/16

X-Gauge Logo X-Gauge is a feature of the ScanGaugeII that allows new digital gauges to be programmed in to the unit. Full instructions on entering X-Gauge codes in to your ScanGaugeII are are available in your user manual. Generic X-Gauge commands can be found on the manufacturers website here. All of our X-Gauge codes specifically for Australian vehicles are listed in the table below……
Please email us if you have any questions regarding X-Gauges. Email is the preferred method for technical and X-Gauge enquiries as technical staff may not be on hand to field your questions via telephone.

General Notes on the  Gauges listed here:
  • Gauges listed here have been developed specifically for Australian Vehicles. These codes may not work for vehicles in other countries.
  • ATF = Automatic Transmission Fluid.
  • All ATF Gauges require a ScanGaugeII with firmware version 4 or newer. To upgrade your ScanGauge firmware please click the link at the bottom of this page
  • Ensure codes are entered correctly (including the zeros), missing a digit in one of the entries can lead to unexpected results or the gauge not working at all. The gauges on this page have been tested by numerous customers, if they do not work for you please double check the codes were entered correctly before calling us for assistance.
  • Other X-Gauge codes can be found on the USA ScanGauge site here.
Holden / Isuzu
TXD
RXF
RXD
MTH
Notes: All ATF gauges require ScanGaugeII with firmware version 4 onwards.
Colorado / D-Max / Cross 8 ATF Temperature 07E2221940 046205190640 3008 00010001FFD8 Confirmed on the all new 2012 Colorado 6sp Auto. Initial tests reveal the 2012-on D-Max 5 Speed Auto is also compatible with this gauge, additional user Feedback required. Also works with previous generation Colorado and D-Max.
Jackaroo RPM Fix 686AF1010C 0441050C0000 2810 000100010000  Jackaroo reports RPM at 1/4 actual speed on OBD system. This X-Gauge corrects that issue.
Jackaroo ATF Temperature  (V6 Petrol only) 6C10F1221940(01) 046205190640 3008 00010001FFD8

May require the numbers in brackets. GM VPW Protocol.

May not work in all models. Please call our office on 1300 796 960 to confirm.

         
         
Toyota
TXD RXF RXD  MTH Notes: All ATF gauges require ScanGaugeII with firmware version 4 onwards.
ATF Temperature A 07E121D9 032100000000 2808 00010001FFD8 For 200 Series Petrol and Diesel, 5 speed Auto 120 Series Prado D4D (Oil pan sensor)
For 150 Series Prado D4D (Torque Converter Sensor).
ATF Temperature B 07E121D9 032180000000 1810 0003004DFE70 For 150 Series Prado – Oil pan sensor 
ATF Temperature 1 07E021D9 032180000000 2810 0003004DFE70 For 2005+ V6 Prado and USA 2008 FJ Cruiser (believed to be the torque converter sensor). 
ATF Temperature 2 07E021D9 032180000000 1810 0003004DFE70 For 2005+ V6 Prado (Oil pan sensor).
ATF Temperature 3 07E021D9 032180000000 3810 0003004DFE70 Compatibility feedback Required.
ATF Temperature 4 07E02182 046510820000 2808 00010001FFD8 For 2011+ AUSTRALIAN FJ Cruiser. May work on other Toyota vehicles 2010+ if the other gauges above have not. (Confirmed in 2016 models).
ATF Temperature 5 07E02182 046105820000 3808 00010001FFD8 For 2011+ USA FJ Cruiser and all 2016 Australia Models -Torque converter sensor
May work on other Toyota vehicles 2010+ if the other gauges above have not.
ATF Temperature 6 686AF101B4 044105B40000 2808 00010001FFD8 For 100 Series V8 Petrol.
ATF Temperature 7 07E02182  046105820000  2808 00010001FFD8 For all 2016 Australia Models – Oil pan sensor (if this code does not work please try ATF Temperature 5)
Hilux ATF Temperature
5 Speed Auto ONLY
07E121D9 032180000000 1810 0003004DFE70  For 5 speed auto only.  Will NOT work in 4 speed Auto models. Feedback needed from owners of petrol models.
Hilux Turbo Boost – Download PDF sheet  There is now a Boost Gauge included as standard since version 4 firmware. To activate the BST gauge go to ADVANCED SETTINGS / MANIFOLD PRESSURE METHOD and change it to BOOST. The BST gauge will then be available on the gauge screen. For certain Hilux models where the default Boost Gauge may not work, download the X-Gauge PDF using the link to the left.
Engine Runtime (Minutes) 07DF011F 0441051F 2810 0001003C0000 For 2005+ V6 Prado.
Exhaust Gas Temp (EGT)
 07DF0178  054106780000  3810  0001000AFFD8 For 2016 + models
Exhaust Gas Temp between the turbo outlet and the DPF: (reads about 380-500 Celsius under load and 600 during a DPF clean)
FORD – PWM Protocol TXD RXF RXD MTH Notes: All ATF gauges require ScanGaugeII with firmware version 4 onwards.
ATF Temperature (deg C) C410F1221674 046205160674 3010 00050048FFEE  
         
FORD – CAN Protocol TXD
RXF
RXD
MTH
 Notes: All ATF gauges require ScanGaugeII with firmware version 4 onwards.
ATF Temperature for PX Ranger 2011+ 07E1221E1C 0462451E061C 3010 003F000A0000 5 cylinder turbo diesel models.
ATF Temperature for PK Ranger 07E1221674 046205160674 3010 00050048FFEE
Fuel Rail Pressure 07DF0123 044145230000 2810 001D00C80000 Output is scaled, eg 10 = 10000 PSI. Confirmed in 2009 PJ Ranger.
Coolant Temperature  07E00105  02E804410505  2808  00010001FFD8 For Falcon EcoLPi vehicles. Default coolant gauge reading fluctuates between correct reading and -40. This X-Gauge can be used as a replacement.
MAZDA – CAN Protocol TXD RXF RXD MTH Notes: All ATF gauges require ScanGaugeII with firmware version 4 onwards.
ATF Temperature for BT-50 (B32P/Q) 2011+ 07E1221E1C 0462451E061C 3010 003F000A0000  5 cylinder turbo diesel models.
ATF Temperature for BT-50 (B3000) 07E1221674 046205160674 3010 00050048FFEE  
Trial Fuel Rail Pressure 07DF0123 044145230000 2810 001D00C80000 Output is scaled, eg 10 = 10000 PSI
         
Mitsubishi – CAN Protocol TXD RXF RXD MTH Notes: All ATF gauges require ScanGaugeII with firmware version 4 onwards.
ATF Temperature – Pajero, Triton, Challenger 07E12102 032100000000 2008 00010001FFD8 For 2007+ NS Pajero (not sure about other years), ML-MN Triton DiD and MY11+ Challenger. 2016 MQ Triton untested as of 20/08/15 – feedback required
Nissan TXD RXF RXD MTH Notes
Trial Fuel Rail Pressure 07DF0123 044145230000 2810 001D00C80000  For Patrol CRD – Output is scaled, eg 10 = 10000 PSI
ATF Temperature
 NOT AVAILABLE
      There are no known X-Gauges for Australian Nissan Automatic Transmission Fluid temperatures, Linear Logic is testing codes on USA vehicles but so far none of these codes have worked in Australian models.
Trip Computer Data as an X-Gauge TXD RXF RXD MTH Notes: Full instructions are on Pages 45 – 46 of the user manual.
Distance to Empty 43 800000000000 RXF and MTH are blank. Suggested X-Gauge name: DTE. ScanGauge must be calibrated to vehicle for a few tank fulls for this gauge to be accurate.
Litres to Empty 23 800000000000 RXF and MTH are blank. Suggested X-Gauge name: LTE. ScanGauge must be calibrated to vehicle for a few tank fulls for this gauge to be accurate.
Current Trip Average speed 70 800000000000 RXF and MTH are blank.
Click here to learn how to upgrade older ScanGaugeIIs to include X-Gauge.